Your home should be a quiet and relaxing place to go to after a long day of hard work. That quietness all goes away when when your garage door starts making loud and scary noises while it’s being operated, most people think that that’s what garage doors are supposed to do after a certain period of time. Garage doors are not supposed to make loud grinding noises at all, when they start to make those kinds of noises they need help.
Most of the time homeowners just learn to deal with the loud garage door noises, they seem to think that’s what garage doors door after time. Thankfully for the owner this is not a permanent problem and can be easily fixed, these noises are actually your garage doors way of crying out for help and saying that it needs help. Neighborhood Garage Door Services of Bay Area, CA wants you to know why garage door lubrication is so important to the health of the door system.
The Key To Your Garage Door Health Is Proper Lubrication
There are a few parts of your door system that actually require frequent lubrication to them, if your door is noisy and loud it means that you need to lubricate the required parts. When you are lubricating the door you will most likely want to do it in a specific order depending on how that particular door is set up. Generally this is the order in which you will want to work on the lubrication process.
Tracks. Gently clean the tracks with a wet rag and rid the movable parts of any dirt or debris that may be causing issues. Do not lubricate the tracks just be sure to clean it off.
Springs: Thoroughly spray the springs that are continuously lifting the garage door open and closed over and over again. Only use enough to coat the springs but not so much that it saturates it and starts dripping onto your garage floors.
Hinges. All pivot points of the hinges need to be well lubricated, be careful not to get any lubricate on any of the plastic hinges as it will start to break them down after time.
Rollers. If you have nylon rollers on your door you will need to be sure to only lubricate the bearings and not the rollers itself. The metal rollers won’t need as much accuracy and precision but be careful not to soak it to the point of dripping.
Locks. Sometimes your locks can become stuck and hard to open and close, so give your garage door locks a good coat with the lubricant and be sure to get it into the tumbler as well as the other moving parts too.
After all of the parts to the door are properly lubricated then open and close the garage door a few times to make sure that the lubrication gets distributed evenly. If you are still having problems with the loud noises then you’ll need to determine where it’s coming from and see if you missed anything. If you still have noises and problems then you may need some further help from a professional.
How To Choose The Right Lubricant For Your Garage Door
Neighborhood Garage Door Services of Bay Area, California wants you to be sure that you are using the proper lubricant for your garage door, so we want to give you a couple of options for a good lubrication product. DO NOT use WD-40 to lubricate your garage door, this product may remove the rust but it also removes the grease which most of the moving parts need to work properly.
Choose a good silicone spray or white lithium grease product to lubricate the garage door parts, these products will properly lubricate your door parts and for smaller parts an aerosol would work the best. These lubricants also won’t attract the dust or gum up like some of the other products out there, your garage door will need to be lubricated at least once a year to help prevent any long term damage caused by the friction of the moving parts.
